[. . . ] CAUTION Read these notes before proceeding These servicing instructions are for use by qualified personnel only. [. . . ] carefully turn the instrument over and unscrew the screws marked by the arrows. Hold the chassis (top & Bottom) tightly and turn the instrument the right way up, lift off the top chassis as shown in the figure with care without forcing or disconnecting the cables. - To install the kit into EQUINOX, SK760 or SK880 keyboards, follow the instructions on page 9-10. - To install the kit into WK6 or WK8 keyboards follow the instructions on page 7-8. Model/Modello ENGLISH - Anchor the SCSI board (A) to the support (B) using the screws (D) and washers (E) as show on fig. - Locate the SCSI slot cover and remove it by unscrewing the 3 screws that fix it to the chassis. [. . . ] - Connect the flat cable (G) to CN16 connector on CPU - Collegare il cavo piatto (G) al connettore CN16 board and the other end to CN1 on SCSI board as sulla scheda CPU e l'altro capo al connettore CN1 sulla scheda SCSI come da figura 5. [. . . ]